The Addaptive ƒ(P+F) Solid coverstock is Brunswick’s newest innovation in performance enhancing additive chemistry. ƒ(P+F) describes our latest ƒormula that combines our new (P)rojection and our new (F)riction additives together to create our most aggressive coverstock to date. The Projection additive easily pushes the super aggressive coverstock down lane where the Friction additive kicks in gripping the backend for unprecedented traction. Being able to combine multiple additives in a coverstock allows Brunswick to effectively fine tune the length, mid-lane and backend characteristics of the ball motion.
NEXUS ROTOR CORE The new Nexus Rotor core integrates a center stabilizing capsule and two vertical flip claws. The center stabilizing capsule revs quickly to control the mid-lane. As the axis migrates and the core lays down, the vertical flip claws take over maintaining the rev rate for a strong continuation through the backend and powerful drive through the pins.
BALL MOTION We did it again! The Nexus ƒ(P+F) is so strong we had to add columns to the Ball Comparison chart and increase our Hook Potential scale to describe this ball. With its 1500-grit Siaair micro pad finish, the Nexus ƒ(P+F) offers our highest hook potential of any Brunswick ball to date. With an extremely aggressive ball motion the Nexus ƒ(P+F) skids through the front, saves axis rotation in the mid-lane and grabs the backend with a strong response to friction.
REACTION SET UP The Nexus ƒ(P+F) can be drilled using the standard drilling techniques developed for asymmetric bowling balls.
LIGHTWEIGHT ENGINEERING The unique core shape of each individual ball is used for weights from 14 to 16 pounds. This approach to lightweight ball engineering provides bowlers with consistent ball reaction characteristics across this weight range. At 12 and 13 pounds, Brunswick uses a generic core shape with a RG-differential that is close enough to the 14 to 16 pound shape so the same drilling instructions can be used.

ADDAPTIVE ?(P) PEARL COVERSTOCK
The Addaptive ƒ(P) Pearl coverstock is Brunswick’s newest innovation in performance enhancing additive chemistry. ƒ(P) describes our latest ƒormula that combines our new (P)rojection additive with an aggressive reactive coverstock to skid easily down the lane, saving axis rotation for the backend that results in higher entry angles into the pocket and improved ball motion through the pins. Being able to utilize performance enhancing additives in a coverstock allows Brunswick to effectively fine tune the length, mid-lane and backend characteristics of the ball motion.
NEXUS ARROWHEAD CORE
The new Nexus Arrowhead core features a single density squared-off elliptical inner core that is dynamically designed to stay on line, enhancing downlane projection. This long and sleek core helps the Nexus ƒ(P) preserve revs and ball speed into the backend of the lane which results in increased pin action and higher scores.
BALL MOTION
With its Rough Buff Finish, the Nexus ƒ(P) projects easily through the front, storing axis rotation and revolutions in the mid-lane while gripping the backend for a strong continuous motion that slices through the pins with ease on medium oil lane conditions. REACTION SETUP
The Nexus ƒ(P) can be drilled using the standard drilling techniques developed for asymmetric bowling balls.
LIGHTWEIGHT ENGINEERING
The unique core shape of each individual ball is used for weights from 14 to 16 pounds. This approach to lightweight ball engineering provides bowlers with consistent ball reaction characteristics across this weight range. At 12 and 13 pounds, Brunswick uses a generic core shape with a RG-differential that is close enough to the 14 to 16 pound shape so the same drilling instructions can be used.

ADDAPTIVE ?(P+R) SOLID COVERSTOCK
The Addaptive ƒ (P+R) Solid coverstock is Brunswick’s newest innovation in performance enhancing additive chemistry. ƒ (P+R) describes our latest formula that combines our new (P)rojection and our new ®ecovery additives together to create our most aggressive coverstock to date. The Projection additive easily pushes the super aggressive coverstock down lane where the Recovery additive connects with the lane for an extraordinary backend hook motion. Being able to combine multiple additives in a coverstock allows Brunswick to effectively fine tune the length, mid-lane and backend characteristics of the ball.
NEXUS ROTOR CORE
The new Nexus Rotor core integrates a center stabilizing capsule and two vertical flip claws. The center stabilizing capsule revs quickly to control the mid-lane. As the axis migrates and the core lays down, the vertical flip claws take over maintaining the rev rate for a strong continuation through the backend and powerful drive through the pins.
BALL MOTION
The Nexxus ƒ (P+R) is so strong it extends the limits of our Ball Comparison chart. With its 1500-grit Siaair micro pad finish, the Nexxus ƒ (P+R) offers our highest hook potential and most continuation of any Brunswick ball to date.
With an extraordinary ball motion the Nexxus ƒ (P+R) skids through the front, saves axis rotation in the mid-lane and grabs the backend for unbelievable continuation on medium to heavy oil lane conditions.
REACTION SET UP
The Nexxus ƒ (P+R) can be drilled using the standard drilling techniques developed for asymmetric bowling balls.
LIGHTWEIGHT ENGINEERING
The unique core shape of each individual ball is used for weights from 14 to 16 pounds. This approach to lightweight ball engineering provides bowlers with consistent ball reaction characteristics across this weight range. At 12 and 13 pounds, Brunswick uses a generic core shape with a RG-differential that is close enough to the 14 to 16 pound shape so the same drilling instructions can be used.

COVERSTOCK
CFT versa-max solid is our newest breakthrough in Chemical Friction Technology. The CFT versa-max solid coverstock uses a combination of all the CFT coverstocks to create the ultimate coverstock. By using less mechanical friction to produce hook, the CFT versa-max solid coverstock provides enhanced projection down the lane while saving axis rotation for more energy on the backend and through the pins.
CORE
The new Dual Flip I – Block symmetric core incorporates a top and bottom flip block over a centered mass. The centered mass creates stability while the dual flip blocks keep the core revving to the backend all the way through the pins for improved pin action.
BALL MOTION
With its High Gloss Finish, the C•(System) versa-max skids effortlessly through the front, saving axis rotation for the backend with a strong continuous breakpoint. The C•(System) versa-max is the most versatile ball motion from fresh to extremely broken down lane conditions on light to medium-oily lane patterns.
REACTION SET UP
The C•(System) versa-max can be drilled using the standard drilling techniques developed for symmetric bowling balls.
LIGHTWEIGHT ENGINEERING
The unique core shape of each individual ball is used for weights from 14 to 16 pounds. This approach to lightweight ball engineering provides bowlers with consistent ball reaction characteristics across this weight range. At 12 and 13 pounds, Brunswick uses a generic core shape with a RG-differential that is close enough to the 14 to 16 pound shape so the same drilling instructions can be used.

CFT ULTI-MAX PEARL COVERSTOCK
CFT ulti-max pearl is our newest breakthrough in Chemical Friction Technology. The CFT ulti-max pearl coverstock uses the highest concentration of the friction additive in order to maximize the chemical system. The key to CFT is creating more traction with chemical friction instead of mechanical friction. By using less mechanical friction to produce hook, the CFT ultimax pearl coverstock provides enhanced projection down the lane while saving axis rotation for more energy on the backend and through the pins.
CORE
The new Dual Flip I – Block core incorporates a top and bottom flip block over a centered mass. The centered mass creates stability while the dual flip blocks keep the core revving to the backend all the way through the pins for improved pin action.
BALL MOTION
With its Rough Buff Finish, the C · (System) ulti-max skids effortlessly through the front, saving axis rotation in the mid-lane to grab the backend for strong continuous response to friction that cuts easily through the pins on medium to medium-oily lane conditions.

CFT alpha-max is our newest breakthrough in Chemical Friction Technology. The CFT alpha-max coverstock uses a higher concentration of the CFT additive in order to maximize the chemical system. The CFT alpha-max coverstock is the highest friction factor of any Brunswick ball to date. The secret is in the technology which creates more traction with chemical friction instead of mechanical friction. Being able to use less mechanical friction for hook, allows the ball to skid easier through the front part of the lane saving axis rotation for more energy on the backend.
ASYMMETRIC I-BLOCK™ CORE
The proven Asymmetric I – Block core enhances the CFT alpha-max coverstock to create maximum forgiveness, strong entry angles along with versatile drilling layouts
BALL MOTION
This ball is off the chart! The C·(System) alpha-max is so strong we had to add a column to the Ball Comparison chart and increase our Hook Potential scale to describe the ball motion. With its 4000-grit Siaair micro pad finish, the C·(System) alpha-max offers the highest hook potential of any Brunswick ball to date. The C·(System) alpha-max skids effortlessly through the front, saving axis rotation in the mid-lane to grab the backend for strong response to friction and cuts easily through the pins.
REACTION SETUP
The C·(System) alpha-max can be drilled using the standard drilling techniques developed for asymmetric bowling balls.
LIGHTWEIGHT ENGINEERING
The unique core shape of each Brunswick ball is used for weights from 14 to 16 pounds. This approach to lightweight ball engineering provides bowlers with consistent ball reaction characteristics across this weight range. The same drilling instructions can be used for 12- and 13-pound balls. This is because Brunswick uses a generic core shape with an RG differential that is close enough to the 14-16 pound shape.

PROPEL X™ COVERSTOCK
Introducing Propel X reactive coverstock, the newest addition in Brunswick coverstock technology. Propel X features an enhanced pore structure to provide Xtra consistency from shot to shot and Xtra versatility on a wider variety of lane conditions.
MACE™ CORE
Mechanical Asymmetric Core Engineering. The MACE medium RG core has three major benefits, medium RG core system for a breakpoint further down lane, high RG differential to increase backend traction and high RG asymmetric differential to quicken the response time to friction.
BALL MOTION
The Wicked Siege combines the new Propel X coverstock and the MACE medium RG core to produce a ball motion that is clean through the front, consistent in the mid-lane with a quick response to friction on the backend. With its consistency from shot to shot and versatility across the lane, the Wicked Siege will be the first ball out of your bag and a new benchmark ball for Brunswick on medium to oily lane conditions.
REACTION SETUP
The Wicked Siege can be drilled using the standard drilling techniques developed for asymmetric bowling balls.
LIGHTWEIGHT ENGINEERING
The unique core shape of each Brunswick ball is used for weights from 14 to 16 pounds. This approach to lightweight ball engineering provides bowlers with consistent ball reaction characteristics across this weight range. The same drilling instructions can be used for 12- and 13-pound balls. This is because Brunswick uses a generic core shape with an RG differential that is close enough to the 14-16 pound shape.

PROPEL X ™ SOLID COVERSTOCK
The Lethal Revolver maximizes its performance by using Propel X Solid reactive coverstock technology. Propel X Solid features an enhanced pore structure to provide Xtra consistency from shot to shot and Xtra workability on a wider variety of lane conditions.
CORE
The Jack™ core was designed as a low RG symmetric core with a high differential. The low RG engages in the mid-lane assisting in ball motion, and the high differential increases track flare potential giving the ball more opportunity to grip the backend while using standard layouts.
BALL MOTION
With its 2000 Siaair Micro Pad finish, the Lethal Revolver unites the proven Propel X Solid coverstock and the Jack low RG core to produce a ball motion that clears the front part of the lane and produces a strong yet predictable ball motion from the breakpoint through the pins especially for bowlers with lower rev rates.
REACTION SETUP
The Lethal Revolver can be drilled using the standard drilling techniques developed for symmetric bowling balls.
LIGHTWEIGHT ENGINEERING
At Brunswick, the unique core shape of each individual ball is used for weights from 14 to 16 pounds. This approach to lightweight ball engineering provides bowlers with consistent ball reaction characteristics across this weight range. At 12 and 13 pounds, Brunswick uses a generic core shape with a RG-differential that is close enough to the 14 to 16 pound shape so the same drilling instructions can be used.

PROPEL X™ COVERSTOCK
The Loaded Revolver maximizes its performance by using Propel X reactive coverstock technology. Propel X features an enhanced pore structure to provide Xtra consistency from shot to shot and Xtra workability on a wider variety of lane conditions
JACK™ CORE
The Jack core was designed as a low RG symmetric core with a high differential. The low RG engages in the mid-lane assisting in ball motion, and the high differential increases track flare potential giving the ball more opportunity to grip the backend while using standard layouts.
BALL MOTION
With its Rough Buff finish, the Loaded Revolver unites the proven Propel X coverstock and the Jack low RG core to produce a ball motion that clears the front with ease and is aggressive in the mid-lane with a quick, continuous response to friction on the backend.
REACTION SETUP
The Loaded Revolver can be drilled using the standard drilling techniques developed for symmetric bowling balls.
LIGHTWEIGHT ENGINEERING
The unique core shape of each Brunswick ball is used for weights from 14 to 16 pounds. This approach to lightweight ball engineering provides bowlers with consistent ball reaction characteristics across this weight range. The same drilling instructions can be used for 12- and 13-pound balls. This is because Brunswick uses a generic core shape with an RG differential that is close enough to the 14-16 pound shape.

ConneXion™ Grip Coverstock
The Revolver utilizes ConneXion Grip an improved version of ConneXion coverstock. ConneXion Grip incorporates a new formula to increase the footprint size of the coverstock which improves mid-lane and back-end traction.
Jack™ Core
The Jack core was designed as a low RG symmetric core with a high differential. The low RG engages in the mid-lane assisting in ball motion, and the high differential increases track flare potential giving the ball more opportunity to grip the back-end while using standard layouts and interchangeable thumb sleeves.
Ball Motion
With its 4,000 Siaair Micro Pad finish, the Revolver will provide good length with a strong continuous back-end reaction that matches up on medium to oily lane conditions for a wide range of bowling styles.
Reaction Setup
The Revolver can be drilled using the standard drilling techniques developed for symmetric bowling balls.
Lightweight Engineering
The unique core shape of each Brunswick ball is used for weights from 14 to 16 pounds. This approach to lightweight ball engineering provides bowlers with consistent ball reaction characteristics across this weight range. The same drilling instructions can be used for 12- and 13-pound balls. This is because Brunswick uses a generic core shape with an RG differential that is close enough to the 14-16 pound shape.

PROPEL COVERSTOCK Propel™ is a evolutionary coverstock developed by Brunswick to improve the mid-lane and backend traction of the ball on today’s slicker oils and lane surfaces. The Propel coverstock was discovered through testing of new formulation additives and process changes in coverstock manufacturing. MACE CORE Mechanical Asymmetric Core Engineering. The MACE core has three major benefits: ultra low RG core system to engage the Propel coverstock, high RG differential to aid in traction through heavy oil and high RG asymmetric differential to quicken the response time to friction. Designed as a two-component elliptical core system, the MACE core is dynamically the strongest asymmetric core ever produced for a Brunswick ball. BALL MOTION The Battering Siege™ unites the Propel coverstock and the MACE core to produce a ball motion that is both aggressive in the oil and aggressive on the backend. The Battering Siege is your ball when your game needs help battling heavy oil conditions and poor pin action. REACTION SETUP The Battering Siege can be drilled using the standard drilling techniques developed for asymmetric bowling balls. LIGHTWEIGHT ENGINEERING The unique core shape of each Brunswick ball is used for weights from 14 to 16 pounds. This approach to lightweight ball engineering provides bowlers with consistent ball reaction characteristics across this weight range. The same drilling instructions can be used for 12- and 13-pound balls. This is because Brunswick uses a generic core shape with an RG differential that is close enough to the 14-16 pound shape.

ACTIVATOR PLUS COVERSTOCK
Activator Plus is a more aggressive version of the original Activator coverstock formulation and features enhanced durability and performance longevity. The pearlized version of Activator Plus coverstock used on the Massive Damage is factory-finished with rough buff compound to create more traction in the oil, increasing the ball’s mid-lane and back-end hooking action, while still being clean through the front part of the lane. The Massive Damage uses a larger pearl additive that creates more vivid colors and provides added length and backend reaction.
CORE
The Massive Damage features a new Low RG Performance core that revs quickly providing mid-lane control with a strong predictable back-end motion.
BALL MOTION
With its Rough Buff finish, the Massive Damage will rev quickly in the mid-lane with a strong continuous back-end reaction that matches up on medium oil lane conditions for a wide range of bowling styles.
REACTION SETUP
The Massive Damage can be drilled using the standard drilling techniques developed for symmetric bowling balls.
LIGHTWEIGHT ENGINEERING
At Brunswick, the unique core shape of each individual ball is used for weights from 14 to 16 pounds. This approach to lightweight ball engineering provides bowlers with consistent ball reaction characteristics across this weight range. At 12 and 13 pounds, Brunswick uses a generic core shape with a RG-differential that is close enough to the 14 to 16 pound shape so the same drilling instructions can be used.

POWRKOIL™ COVERSTOCK
The PowrKoil 18 coverstock is a proven performer in the bowling industry. Aggressive in the oil and strong off the dry, PowrKoil 18 is a perennial favorite among all styles of bowlers. The Damage uses a new, larger pearl additive that creates more vivid colors and provides added length and backend reaction.
CORE
The Damage incorporates a new High RG performance core that provides easy length through the heads and mid-lane while maintaining axis rotation for a strong continuous backend motion.
BALL MOTION
With its high gloss fi nish, the Damage will provide excellent length with a quick response to friction at the breakpoint. The Damage is the highest rated breakpoint shape ball at the Advanced Performance price point from Brunswick and will match up on medium to dry lane conditions for a wide range of bowling styles.
REACTION SETUP
The Damage can be drilled using the standard drilling techniques developed for symmetric bowling balls.
LIGHTWEIGHT ENGINEERING
The unique core shape of each Brunswick ball is used for weights from 14 to 16 pounds. This approach to lightweight ball engineering provides bowlers with consistent ball reaction characteristics across this weight range. The same drilling instructions can be used for 12- and 13-pound balls. This is because Brunswick uses a generic core shape with an RG differential that is close enough to the 14-16 pound shape.

POWRKOIL™ 18 COVERSTOCK
PowrKoil 18 coverstock is a proven performer in the bowling industry. Aggressive in the oil and strong off the dry, PowrKoil 18 is a perennial favorite among all styles of bowlers. The Karma Black / Blue Solid uses a solid version of PowrKoil 18 which provides more mid lane traction for a smooth continuous backend motion.
CORE
The Karma Black / Blue Solid incorporates a familiar light bulb shape Medium RG Performance core that provides easy length through the heads, mid-lane stability while maintaining axis rotation for a strong continuous backend motion.
BALL MOTION
With its High Gloss box finish, the Karma Black / Blue Solid will provide good length through the heads, a medium response to friction in the mid lane with a smooth controllable backend. The Karma Black / Blue Solid is great ball for rev dominant and slower ball speed players on medium to light oil conditions.
REACTION SETUP
The Karma can be drilled using the standard drilling techniques developed for symmetric bowling balls.
LIGHTWEIGHT ENGINEERING
At Brunswick, the unique core shape of each individual ball is used for weights from 12 to 16 pounds. This approach to lightweight ball engineering provides bowlers with consistent ball reaction characteristics across this weight range.

POWRKOIL™ 18 COVERSTOCK
PowrKoil 18 coverstock is a proven performer in the bowling industry. Aggressive in the oil and strong off the dry, PowrKoil 18 is a perennial favorite among all styles of bowlers. The Karma Blue / Green Pearl uses a pearlized version of PowrKoil 18 which provides more mid lane traction for a smooth continuous backend motion.
CORE
The Karma Blue / Green Pearl incorporates a familiar light bulb shape Medium RG Performance core that provides easy length through the heads, mid-lane stability while maintaining axis rotation for a strong continuous backend motion.
BALL MOTION
With its High Gloss box finish, the Karma Blue / Green Pearl will provide excellent length with a medium to quick response to friction at the breakpoint. The Karma Blue / Green Pearl is great ball for rev dominant and slower ball speed players on light oil conditions.
REACTION SETUP
The Karma can be drilled using the standard drilling techniques developed for symmetric bowling balls.
LIGHTWEIGHT ENGINEERING
At Brunswick, the unique core shape of each individual ball is used for weights from 12 to 16 pounds. This approach to lightweight ball engineering provides bowlers with consistent ball reaction characteristics across this weight range.

Get pinpoint accuracy and show your style. Available in attractive colors and patterns at an affordable price.
Bullet Core
Small-shaped version of the high-tech, two-piece.

Get pinpoint accuracy and show your style. Available in attractive colors and patterns at an affordable price.
Bullet Core
Small-shaped version of the high-tech, two-piece.

Get pinpoint accuracy and show your style. Available in attractive colors and patterns at an affordable price.
Bullet Core
Small-shaped version of the high-tech, two-piece.

Get pinpoint accuracy and show your style. Available in attractive colors and patterns at an affordable price.
Bullet Core
Small-shaped version of the high-tech, two-piece.

Get pinpoint accuracy and show your style. Available in attractive colors and patterns at an affordable price.
Bullet Core
Small-shaped version of the high-tech, two-piece.

Get pinpoint accuracy and show your style. Available in attractive colors and patterns at an affordable price.
Bullet Core
Small-shaped version of the high-tech, two-piece.

Bowling balls with exclusive 360 degree, limited edition graphics
The question is, what will we do next?

Bowling balls with exclusive 360 degree, limited edition graphics
The question is, what will we do next?

Bowling balls with exclusive 360 degree, limited edition graphics
The question is, what will we do next?

Bowling balls with exclusive 360 degree, limited edition graphics
The question is, what will we do next?

Bowling balls with exclusive 360 degree, limited edition graphics
The question is, what will we do next?

Bowling balls with exclusive 360 degree, limited edition graphics
The question is, what will we do next?

Bowling balls with exclusive 360 degree, limited edition graphics
The question is, what will we do next?

Bowling balls with exclusive 360 degree, limited edition graphics
The question is, what will we do next?

Bowling balls with exclusive 360 degree, limited edition graphics
The question is, what will we do next?

Bowling balls with exclusive 360 degree, limited edition graphics
The question is, what will we do next?

Bowling balls with exclusive 360 degree, limited edition graphics
The question is, what will we do next?

Bowling balls with exclusive 360 degree, limited edition graphics
The question is, what will we do next?